Cisco 300 Series Administration Guide

Security
Configuring TACACS+
334 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
18
The following information is sent to the TACACS+ server by the device when a
user logs in or out:
Defaults
The following defaults are relevant to this feature:
• No default TACACS+ server is defined by default.
• If you configure a TACACS+ server, the accounting feature is disabled by
default.
Interactions With Other Features
You cannot enable accounting on both a RADIUS and TACACS+ server.
Workflow
To use a TACACS+ server, do the following:
STEP 1 Open an account for a user on the TACACS+ server.
STEP 2 Configure that server along with the other parameters in the TACACS+ and Add
TACAC S + S e r ver pages .
Table 2:
Argument Description In Start
Message
In Stop
Message
task_id A unique accounting session
identifier.
Ye s Ye s
user Username that is entered for
login authentication.
Ye s Ye s
rem-addr P address of the user. Yes Yes
elapsed-time Indicates how long the user was
logged in.
No Yes
reason Reports why the session was
terminated.
No Yes

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48