Cisco 300 Series - Management Interface; User Accounts; Defining Idle Session Timeout; Time Settings

Administration
Management Interface
64 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
5
Management Interface
See IPv4 Management and Interfaces.
User Accounts
See Defining Users.
Defining Idle Session Timeout
The Idle Session Timeout configures the time intervals that the management
sessions can remain idle before they timeout and you must log in again to
reestablish one of the following sessions:
• HTTP Session Timeout
• HTTPS Session Timeout
• Console Session Timeout
• Telnet Session Timeout
• SSH Session Timeout
To set the idle session timeout for various types of sessions:
STEP 1 Click Administration > Idle Session Timeout.
STEP 2 Select the timeout for the each session from the corresponding list. The default
timeout value is 10 minutes.
STEP 3 Click Apply to set the configuration settings on the device.
Time Settings
See Administration: Time Settings.