Administration: File Management
Auto Configuration via DHCP
50 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
4
• If you are backing up a configuration file, select one of the following formats
for the backup file.
- Exclude—Sensitive data is not included in the backup file.
- Encrypted—Sensitive data is included in the backup file in encrypted
form.
- Plaintext—Sensitive data is included in the backup file in plain text.
NOTE The available sensitive data options are determined by the current
user SSD rules. For details, refer to Secure Sensitive Data Management >
SSD Rules page.
STEP 4 The Save Icon Blinking field indicates whether an icon blinks when there is
unsaved data. To disable/enable this feature, click Disable/Enable Save Icon
Blinking.
STEP 5 Click Apply. The file is copied.
Auto Configuration via DHCP
DHCP auto configuration enables passing configuration information to hosts on a
TCP/IP network. Based on this protocol, the Auto Configuration feature enables a
device to download configuration files from a TFTP/SCP server.
To use this feature, the device must be configured as a DHCPv4 client in which
case auto configuration from a DHCPv4 server is supported and/or a DHCPv6
client in which case auto configuration from a DHCPv6 server is supported.
By default, the device is enabled as a DHCP client when the Auto Configuration via
DHCP feature is enabled.
The Auto Configuration process also supports downloading a configuration file
that includes sensitive information, such as RADIUS server keys and SSH/SSL
keys, by using the Secured Copy Protocol (SCP) and the Secure Sensitive Data
(SSD) feature (See Security: Secure Sensitive Data Management).
To Next Page
Loading...
Need help?
General
