Cisco 300 Series Administration Guide

Security: 802.1X Authentication
802.1X Configuration Through the GUI
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 403
19
Web Authentication Customization
This page enables designing web-based authentication pages in various
languages.
You can add up to 4 languages.
NOTE Up to 5 HTTP users and one HTTPS user can request web-based authentication at
the same time. When these users are authenticated, more users can request
authentication.
To add a language for web-based authentication:
STEP 1 Click Security > 802.1X/MAC/Web Authentication > Web Authentication
Customization.
STEP 2 Click Add.
STEP 3 Select a language from the Language drop-down list.
STEP 4 Select Set as Default Display Language if this language is the default language.
the default language pages are displayed if the end user does not select a
language.
STEP 5 Click Apply and the settings are saved to the Running Configuration file.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48