Cisco 300 Series Administration Guide

Security: 802.1X Authentication
802.1X Configuration Through the GUI
406 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
19
• Language Dropdown Label—Enter the label of the language selection
dropdown.
• Login Button Label—Enter the label of the login button.
• Login Progress Label—Enter the text that will be displayed during the login
process.
STEP 8 Click Apply and the settings are saved to the Running Configuration file.
STEP 9 Click Edit4. The following fields are displayed:
• Terms and Conditions—Select to enable a terms and conditions text box.
• Terms and Conditions Warning—Enter the text of the message to be
displayed as instructions to enter the terms and conditions.
• Terms and Conditions Contents—Enter the text of the message to be
displayed as terms and conditions.
STEP 10 Click Apply and the settings are saved to the Running Configuration file.
STEP 11 Edit5. The following fields are displayed:
• Copyright—Select to enable displaying copyright text.
• Copyright Text—Enter the copyright text.
STEP 12 Click Apply and the settings are saved to the Running Configuration file.
STEP 13 Click Edit Success Page.
Figure 5 The following page is displayed
.
STEP 14 Click the Edit. button on the right side of the page.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48