Cisco 300 Series Administration Guide

Access Control
IPv4-based ACLs
481 Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
24
- EGP —Exterior Gateway Protocol
-
IGP —Interior Gateway Protocol
-
UDP —User Datagram Protocol
-
HMP —Host Mapping Protocol
-
RDP —Reliable Datagram Protocol.
-
IDPR —Inter-Domain Policy Routing Protocol
-
IPV6 —IPv6 over IPv4 tunneling
-
IPV6:ROUT —Matches packets belonging to the IPv6 over IPv4 route
through a gateway
-
IPV6:FRAG —Matches packets belonging to the IPv6 over IPv4 Fragment
Header
-
IDRP —Inter-Domain Routing Protocol
-
RSVP —ReSerVation Protocol
-
AH —Authentication Header
-
IPV6:ICMP —Internet Control Message Protocol
-
EIGRP —Enhanced Interior Gateway Routing Protocol
-
OSPF —Open Shortest Path First
-
IPIP —IP in IP
-
PIM —Protocol Independent Multicast
-
L2TP —Layer 2 Tunneling Protocol
-
ISIS —IGP-specific protocol
• Protocol ID to Match—Instead of selecting the name, enter the protocol ID.
• Source IP Address—Select Any if all source address are acceptable or
User defined to enter a source address or range of source addresses.
• Source IP Address Value—Enter the IP address to which the source IP
address is to be matched.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48