Cisco CATALYST 2960 Command Reference Guide

2-117
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
interface vlan
Examples This example shows how to create a new VLAN with VLAN ID 23 and to enter interface configuration
mode:
Switch(config)# interface vlan 23
Switch(config-if)#
You can verify your setting by entering the show interfaces and show interfaces vlan vlan-id privileged
EXEC commands.
Related Commands Command Description
show interfaces vlan vlan-id Displays the administrative and operational status of all
interfaces or the specified VLAN.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)