Cisco CATALYST 2960 - Switchport Priority Extend; Switchport Protected; Switchport Trunk; Switchport Voice Vlan

Index
IN-17
Catalyst 2960 Switch Command Reference
OL-8604-03
switchport port-security command 2-711
switchport priority extend command 2-718
switchport protected command 2-720
switchports, displaying 2-453
switchport trunk command 2-722
switchport voice vlan command 2-725
system message logging, save message to flash 2-176
system mtu command 2-727
system resource templates 2-385
T
tar files, creating, listing, and extracting 2-8
TDR, running 2-729
Telnet, using to communicate to cluster switches 2-275
temperature information, displaying 2-439
templates, SDM 2-385
templates, system resources 2-385
test cable-diagnostics tdr command 2-729
traceroute mac command 2-730
traceroute mac ip command 2-733
trunking, VLAN mode 2-706
trunk mode 2-706
trunk ports 2-706
trunks, to non-DTP device 2-707
trusted boundary for QoS 2-240
trusted port states for QoS 2-240
type (boot loader) command A-22
U
UDLD
aggressive mode
2-737, 2-739
debug messages, display B-81
enable globally 2-737
enable per interface 2-739
error recovery timer 2-104
message timer 2-737
UDLD (continued)
normal mode
2-737, 2-739
reset a shutdown interface 2-741
status 2-560
udld command 2-737
udld port command 2-739
udld reset command 2-741
unicast storm control 2-695
UniDirectional Link Detection
See UDLD
unknown multicast traffic, preventing
2-704
unknown unicast traffic, preventing 2-704
unset (boot loader) command A-23
upgrading
software images
downloading
2-6
monitoring status of 2-401
upgrading information
See release notes
UplinkFast, for STP
2-682
user EXEC mode 1-2, 1-3
V
version (boot loader) command A-25
vlan (global configuration) command 2-742
vlan (VLAN configuration) command 2-748
VLAN configuration
rules
2-745, 2-750
saving 2-742, 2-752
VLAN configuration mode
commands
VLAN
2-748
VTP 2-766
description 1-5
entering 2-754
summary 1-2
vlan database command 2-754
VLAN ID range 2-742, 2-748