Cisco CATALYST 2960 - Ease-of-Deployment and Ease-of-Use Features; Express Setup for quickly configuring a switch for the first time with basic IP information, contact information, switch and Telnet passwords, and Simple Network Management Protocol (SNMP) information through a browser-based program. For more information about Express Setup, see the getting started guide.; User-defined and Cisco-default Smartports macros for creating custom switch configurations for simplified deployment across the network.; An embedded device manager GUI for configuring and monitoring a single switch through a web browser. For information about launching the device manager, see the getting started guide. For more information about the device manager, see the switch online help.

2-24
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
boot private-config-file
boot private-config-file
Use the boot private-config-file global configuration command to specify the filename that Cisco IOS
uses to read and write a nonvolatile copy of the private configuration. Use the no form of this command
to return to the default setting.
boot private-config-file filename
no boot private-config-file
Syntax Description
Defaults The default configuration file is private-config.
Command Modes Global configuration
Command History
Usage Guidelines Filenames are case sensitive.
Examples This example shows how to specify the name of the private configuration file to be pconfig:
Switch(config)# boot private-config-file pconfig
Related Commands
filename The name of the private configuration file.
Release Modification
12.2(25)FX This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.