Cisco CATALYST 2960 Command Reference Guide

2-757
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
vmps reconfirm (privileged EXEC)
vmps reconfirm (privileged EXEC)
Use the vmps reconfirm privileged EXEC command to immediately send VLAN Query Protocol (VQP)
queries to reconfirm all dynamic VLAN assignments with the VLAN Membership Policy Server
(VMPS).
vmps reconfirm
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to immediately send VQP queries to the VMPS:
Switch# vmps reconfirm
You can verify your setting by entering the show vmps privileged EXEC command and examining the
VMPS Action row of the Reconfirmation Status section. The show vmps command shows the result of
the last time the assignments were reconfirmed either because the reconfirmation timer expired or
because the vmps reconfirm command was entered.
Related Commands
Release Modification
12.2(25)FX This command was introduced.
Command Description
show vmps Displays VQP and VMPS information.
vmps reconfirm (global
configuration)
Changes the reconfirmation interval for the VQP client.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)