Cisco CATALYST 2960 Command Reference Guide

2-756
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
vlan database
VLAN ISL Id: 1002
Name: fddi-default
Media Type: FDDI
VLAN 802.10 Id: 101002
State: Operational
MTU: 1500
Bridge Type: SRB
Ring Number: 0
Translational Bridged VLAN: 1
Translational Bridged VLAN: 1003
<output truncated>
This is an example of output from the show changes command:
Switch(vlan)# show changes
DELETED:
VLAN ISL Id: 4
Name: VLAN0004
Media Type: Ethernet
VLAN 802.10 Id: 100004
State: Operational
MTU: 1500
MODIFIED:
VLAN ISL Id: 7
Current State: Operational
Modified State: Suspended
This example shows how to display the differences between VLAN 7 in the current database and the
proposed database.
Switch(vlan)# show changes 7
MODIFIED:
VLAN ISL Id: 7
Current State: Operational
Modified State: Suspended
This is an example of output from the show current 20 command. It displays only VLAN 20 of the
current database.
Switch(vlan)# show current 20
VLAN ISL Id: 20
Name: VLAN0020
Media Type: Ethernet
VLAN 802.10 Id: 100020
State: Operational
MTU: 1500
Related Commands Command Description
show vlan Displays the parameters for all configured VLANs in the administrative
domain.
shutdown vlan Shuts down (suspends) local traffic on the specified VLAN.
vlan (global
configuration)
Enters config-vlan mode for configuring normal-range and extended-range
VLANs.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)