Cisco CATALYST 2960 Command Reference Guide

2-5
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
aaa authorization network
aaa authorization network
Use the aaa authorization network global configuration command to the configure the switch to use
user-RADIUS authorization for all network-related service requests, such as IEEE 802.1x VLAN
assignment. Use the no form of this command to disable RADIUS user authorization.
aaa authorization network default group radius
no aaa authorization network default
Syntax Description
Defaults Authorization is disabled.
Command Modes Global configuration
Command History
Usage Guidelines Use the aaa authorization network default group radius global configuration command to allow the
switch to download IEEE 802.1x authorization parameters from the RADIUS servers in the default
authorization list. The authorization parameters are used by features such as VLAN assignment to get
parameters from the RADIUS servers.
Use the show running-config privileged EXEC command to display the configured lists of authorization
methods.
Examples This example shows how to configure the switch for user RADIUS authorization for all network-related
service requests:
Switch(config)# aaa authorization network default group radius
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
default group
radius
Use the list of all RADIUS hosts in the server group as the default authorization
list.
Release Modification
12.2(25)FX This command was introduced.
Command Description
show running-config Displays the current operating configuration. For syntax information, select
Cisco IOS Configuration Fundamentals Command Reference, Release
12.2 > File Management Commands > Configuration File Management
Commands.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)