Cisco CATALYST 2960 Command Reference Guide

C-14
Catalyst 2960 Switch Command Reference
OL-8604-03
Appendix C Catalyst 2960 Switch Show Platform Commands
show platform pm
show platform pm
Use the show platform pm privileged EXEC command to display platform-dependent port-manager
information.
show platform pm {counters | group-masks | idbs {active-idbs | deleted-idbs} | if-numbers |
link-status | platform-block | port-info interface-id | vlan {info | line-state}
[ | {begin | exclude | include} expression]
Syntax Description
Note Though visible in the command-line help strings, the stack-view keyword is not supported.
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
counters Display module counters information.
group-masks Display EtherChannel group masks information.
idbs {active-idbs |
deleted-idbs}
Display interface data block (IDB) information. The keywords have these
meanings:
• active-idbs—Display active IDB information.
• deleted-idbs—Display deleted and leaked IDB information.
if-numbers Display interface numbers information.
link-status Display local port link status information.
platform-block Display platform port block information.
port-info interface-id Display port administrative and operation fields for the specified interface.
vlan {info | line-state} Display platform VLAN information. The keywords have these meanings:
• info—Display information for active VLANs.
• line-state—Display line-state information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)FX This command was introduced.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)