Cisco CATALYST 2960 - CHAPTER 2; Using the Command-Line Interface; Understanding Command Modes; When you start a session on the switch, you begin in user mode, often called user EXEC mode. Only a limited subset of the commands are available in user EXEC mode. For example, most of the user EXEC commands are one-time commands, such as show commands, which show the current configuration status, and clear commands, which clear counters or interfaces. The user EXEC commands are not saved when the switch reboots.

2-49
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
clear vmps statistics
clear vmps statistics
Use the clear vmps statistics privileged EXEC command to clear the statistics maintained by the VLAN
Query Protocol (VQP) client.
clear vmps statistics
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to clear VLAN Membership Policy Server (VMPS) statistics:
Switch# clear vmps statistics
You can verify that information was deleted by entering the show vmps statistics privileged EXEC
command.
Related Commands
Release Modification
12.2(25)FX This command was introduced.
Command Description
show vmps Displays the VQP version, reconfirmation interval, retry count, VMPS IP
addresses, and the current and primary servers.