Cisco CATALYST 2960 Command Reference Guide

iii
Catalyst 2960 Switch Command Reference
OL-8604-03
CONTENTS
Preface xvii
Audience xvii
Purpose xvii
Conventions xvii
Related Publications xviii
Obtaining Documentation, Obtaining Support, and Security Guidelines xix
CHAPTER 1 Using the Command-Line Interface 1-1
CLI Command Modes 1-1
User EXEC Mode 1-3
Privileged EXEC Mode 1-3
Global Configuration Mode 1-3
Interface Configuration Mode 1-4
config-vlan Mode 1-4
VLAN Configuration Mode 1-5
Line Configuration Mode 1-5
CHAPTER 2 Catalyst 2960 Switch Cisco IOS Commands 2-1
aaa accounting dot1x 2-1
aaa authentication dot1x 2-3
aaa authorization network 2-5
archive download-sw 2-6
archive tar 2-8
archive upload-sw 2-11
auto qos voip 2-13
boot boothlpr 2-18
boot config-file 2-19
boot enable-break 2-20
boot helper 2-21
boot helper-config-file 2-22
boot manual 2-23

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)