2-565
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show vlan
show vlan
Use the show vlan user EXEC command to display the parameters for all configured VLANs or one
VLAN (if the VLAN ID or name is specified) on the switch.
show vlan [brief | id vlan-id | mtu | name vlan-name | remote-span | summary] [ | {begin |
exclude | include} expression]
Syntax Description
Note Though visible in the command-line help string, the ifindex, internal usage, and private-vlan keywords
are not supported.
Command Modes User EXEC
brief (Optional) Display one line for each VLAN with the VLAN name, status,
and its ports.
id vlan-id (Optional) Display information about a single VLAN identified by VLAN ID
number. For vlan-id, the range is 1 to 4094.
mtu (Optional) Display a list of VLANs and the minimum and maximum
transmission unit (MTU) sizes configured on ports in the VLAN.
name vlan-name (Optional) Display information about a single VLAN identified by VLAN
name. The VLAN name is an ASCII string from 1 to 32 characters.
remote-span (Optional) Display information about Remote SPAN (RSPAN) VLANs.
summary (Optional) Display VLAN summary information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
To Next Page
Loading...
