Cisco CATALYST 2960 Command Reference Guide

A-10
Catalyst 2960 Switch Command Reference
OL-8604-03
Appendix A Catalyst 2960 Switch Bootloader Commands
format
format
Use the format bootloader command to format the specified file system and destroy all data in that file
system.
format filesystem:
Syntax Description
Command Modes Bootloader
Command History
Usage Guidelines
Caution Use this command with care; it destroys all data on the file system and renders your system unusable.
filesystem: Alias for a flash file system. Use flash: for the system board flash device.
Release Modification
12.2(25)FX This command was introduced.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)