Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
rmon collection stats
2-383
Catalyst 2960 Switch Command Reference
OL-8604-03
2]
rmon collection stats
Use the rmon collection stats interface configuration command to collect Ethernet group statistics,
which include usage statistics about broadcast and multicast packets, and error statistics about cyclic
redundancy check (CRC) alignment errors and collisions. Use the no form of this command to return to
the default setting.
rmon collection stats index [owner name]
no rmon collection stats index [owner name]
Syntax Description
Defaults The RMON statistics collection is disabled.
Command Modes Interface configuration
Command History
Usage Guidelines The RMON statistics collection command is based on hardware counters.
Examples This example shows how to collect RMON statistics for the owner root:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# rmon collection stats 2 owner root
You can verify your setting by entering the show rmon statistics privileged EXEC command.
index Remote Network Monitoring (RMON) collection control index. The range
is 1 to 65535.
owner name (Optional) Owner of the RMON collection.
Release Modification
12.2(25)FX This command was introduced.
To Next Page
Loading...
