Cisco CATALYST 2960 Command Reference Guide

A-21
Catalyst 2960 Switch Command Reference
OL-8604-03
Appendix A Catalyst 2960 Switch Bootloader Commands
set
The HELPER_CONFIG_FILE environment variable can also be set by using the boot helper-config-file
filesystem:/file-url global configuration command.
The bootloader prompt string (PS1) can be up to 120 printable characters except the equal sign (=).
Examples This example shows how to change the bootloader prompt:
switch: set PS1 loader:
loader:
You can verify your setting by using the set bootloader command.
Related Commands Command Description
unset Resets one or more environment variables to its previous setting.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)