Cisco CATALYST 2960 Command Reference Guide

2-125
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
ip admission name proxy http
Related Commands Command Description
dot1x fallback Configure a port to use web authentication as a fallback method for clients
that do not support IEEE 802.1x authentication.
fallback profile Create a web authentication fallback profile.
ip admission Enable web authentication on a port
show ip admission Displays information about NAC cached entries or the NAC configuration.
For more information, see the Network Admission Control Software
Configuration Guide on Cisco.com.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)