Cisco CATALYST 2960 - Page 207

2-181
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
mac access-list extended
Examples This example shows how to create a MAC named extended access list named mac1 and to enter extended
MAC access-list configuration mode:
Switch(config)# mac access-list extended mac1
Switch(config-ext-macl)#
This example shows how to delete MAC named extended access list mac1:
Switch(config)# no mac access-list extended mac1
You can verify your settings by entering the show access-lists privileged EXEC command.
Related Commands Command Description
deny (MAC access-list
configuration)
permit (MAC
access-list
configuration)
Configures the MAC ACL (in extended MAC-access list configuration
mode).
show access-lists Displays the access lists configured on the switch.