Cisco CATALYST 2960 Command Reference Guide

2-276
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
rcommand
This command will not work if the vty lines of the cluster command switch have access-class
configurations.
You are not prompted for a password because the cluster member switches inherited the password of the
cluster command switch when they joined the cluster.
Examples This example shows how to start a session with member 3. All subsequent commands are directed to
member 3 until you enter the exit command or close the session.
Switch# rcommand 3
Switch-3# show version
Cisco Internet Operating System Software ...
...
Switch-3# exit
Switch#
Related Commands Command Description
show cluster members Displays information about the cluster members.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)