Cisco CATALYST 2960 Command Reference Guide

2-477
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show ip igmp snooping
ip igmp snooping vlan static Statically adds a Layer 2 port as a member of a multicast
group.
show ip igmp snooping groups Displays the IGMP snooping multicast table for the switch.
show ip igmp snooping mrouter Displays IGMP snooping multicast router ports for the
switch or for the specified multicast VLAN.
show ip igmp snooping querier Displays the configuration and operation information for
the IGMP querier configured on a switch.
Command Description

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)