Cisco CATALYST 2960 Command Reference Guide

2-481
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show ip igmp snooping mrouter
Related Commands Command Description
ip igmp snooping Enables IGMP snooping on the switch or on a VLAN.
ip igmp snooping vlan mrouter Adds a multicast router port.
ip igmp snooping vlan static Statically adds a Layer 2 port as a member of a multicast group.
show ip igmp snooping Displays the IGMP snooping configuration of the switch or the
VLAN
show ip igmp snooping groups Displays IGMP snooping multicast information for the switch or
for the specified parameter.

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)