Cisco CATALYST 2960 - Default Settings After Initial Switch Configuration; Default switch IP address, subnet mask, and default gateway is 0.0.0.0. For more information, see Chapter 3, “Assigning the Switch IP Address and Default Gateway,” and Chapter 20, “Configuring DHCP and IP Source Guard Features.”; DHCP client is enabled, the DHCP server is enabled (only if the device acting as a DHCP server is configured and is enabled), and the DHCP relay agent is enabled (only if the device is acting as a DHCP relay agent is configured and is enabled). For more information, see Chapter 3, “Assigning the Switch IP Address and Default Gateway,” and Chapter 20, “Configuring DHCP and IP Source Guard Features.”; No passwords are defined. For more information, see Chapter 5, “Administering the Switch.”

2-39
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
clear ip dhcp snooping
Related Commands Command Description
ip dhcp snooping Enables DHCP snooping on a VLAN.
ip dhcp snooping database Configures the DHCP snooping binding database agent or
the binding file.
show ip dhcp snooping binding Displays the status of DHCP snooping database agent.
show ip dhcp snooping database Displays the DHCP snooping binding database agent
statistics.
show ip dhcp snooping statistics Displays the DHCP snooping statistics.