D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
118
Cisco DX70 and DX80 Administrator Guide
UserInterface settings
UserInterface ContactInfo Type
Choose which type of contact information to show on the Home screen, and when you tap
the Settings icon.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/None/IPv4/IPv6/SipUri/SystemName/DisplayName
Auto: Show the address which another system can dial to reach this system. The
address depends on the system registration.
None: Do not show any contact information.
IPv4: Show the system's IPv4 address.
IPv6: Show the system's IPv6 address.
SipUri: Show the system's SIP URI (refer to the SIP URI setting).
SystemName: Show the system's name (refer to the SystemUnit Name setting).
DisplayName: Show the system's display name (refer to the SIP DisplayName setting).
UserInterface CustomMessage
A custom message can be displayed, in the lower left side of the screen, in awake mode.
Requires user role: ADMIN, INTEGRATOR
Default value: ""
Value space: String (0..128)
Add a custom message. Add an empty string to remove a custom message.
UserInterface KeyTones Mode
You can configure the system to make a keyboard click sound effect (key tone) when typing
text or numbers.
Requires user role: ADMIN, USER
Default value: Off
Value space: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.
UserInterface Language
Select the language to be used in menus and messages on the screen. If the language is
not supported, the default language (English) will be used.
Requires user role: ADMIN, USER
Default value: English
Value space: Arabic/Catalan/ChineseSimplified/ChineseTraditional/Czech/Danish/Dutch/
English/EnglishUK/Finnish/French/FrenchCanadian/German/Hebrew/Hungarian/Italian/
Japanese/Korean/Norwegian/Polish/Portuguese/PortugueseBrazilian/Russian/Spanish/
SpanishLatin/Swedish/Turkish
Select a language from the list.