D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
31
Cisco DX70 and DX80 Administrator Guide
Delete CUCM trust lists
Sign in to the web interface, navigate to Security >
CUCM Certificates.
Delete the CUCM trust lists
Click Delete CTL/ITL to remove the trust lists.
As a general rule, you should not delete old CTL
(Certificate Trust List) and ITL (Initial Trust List) files.
In these cases, you must still delete them:
• When you change the CUCM IP address.
• When you move the endpoint between CUCM
clusters.
• When you need to re-generate or change the CUCM
certificate.
Overview of trust list fingerprints and certificates
The trust lists’ fingerprints and an overview of the certificates in
the lists are displayed on the web page.
This information may be useful for troubleshooting.
More information about trust
lists
For more information about CUCM and
trust lists, read the Deployment guide for
TelePresence endpoints on CUCM that is
available on the Cisco web site.
The information in this chapter is only relevant for video systems
that are registered to a Cisco Unified Communications Manager
(CUCM).
To Next Page
Loading...
Need help?
General
