Cisco DX70 - Video Selfview Oncall Duration

D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
129
Cisco DX70 and DX80 Administrator Guide
Video Selfview OnCall Duration
This setting only has an effect when the Video Selfview OnCall Mode setting is switched
On. In this case, the number of seconds set here determines for how long self-view is
shown before it is automatically switched off.
Requires user role: ADMIN, INTEGRATOR
Default value: 10
Value space: Integer (1..60)
Range: Choose for how long self-view remains on. The valid range is between 1 and 60
seconds.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

System settings