D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
33
Cisco DX70 and DX80 Administrator Guide
Set strong security mode
Sign in to the web interface, navigate to Security >
Strong Security Mode.
About strong security mode
Use strong security mode only when
compliance with DoD JITC regulations is
required.
Strong security mode sets very strict
passphrase requirements, and requires all
users to change their passphrase on the
next sign in.
Return to normal mode
Click Disable Strong Security Mode... in order to
restore the video system to normal mode. Confirm
your choice in the dialog box that appears.
The video system restarts automatically.
Set strong security mode
Read carefully about the consequences of strong
security mode before you continue.
1. If you want to use strong security mode, click
Enable Strong Security Mode.... and confirm
your choice in the dialog box that appears.
The video system restarts automatically.
2. Change the passphrase when you are
prompted. The new passphrase must meet the
strict criteria as described.
How to change the system passphrase is
described in the ► Change the system
passphrase chapter.
To Next Page
Loading...
Need help?
General
