Cisco DX70 Administrator's Guide

D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
90
Cisco DX70 and DX80 Administrator Guide
Network [1] TrafficControl Mode
Define the network traffic control mode to decide how to control the video packets
transmission speed.
Requires user role: ADMIN, USER
Default value: On
Value space: Off/On
Off: Transmit video packets at link speed.
On: Transmit video packets at maximum 20 Mbps. Can be used to smooth out bursts in
the outgoing network traffic.
Network [1] VLAN Voice Mode
Define the VLAN voice mode. The VLAN Voice Mode will be set to Auto automatically if you
have Cisco UCM (Cisco Unified Communications Manager) as provisioning infrastructure.
Note that Auto mode will NOT work if the NetworkServices CDP Mode setting is Off.
Requires user role: ADMIN, USER
Default value: Auto
Value space: Auto/Manual/Off
Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If
CDP is not available, VLAN is not enabled.
Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If
CDP is available, the manually set value will be overruled by the value assigned by CDP.
Off: VLAN is not enabled.
Network [1] VLAN Voice VlanId
Define the VLAN voice ID. This setting will only take effect if Network VLAN Voice Mode is
set to Manual.
Requires user role: ADMIN, USER
Default value: 1
Value space: Integer (1..4094)
Set the VLAN voice ID.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

System settings

Cisco DX70 Specifications

General

Brand	Cisco
Model	DX70
Category	Conference System
Language	English