Cisco DX70 - Execute API Commands and Configurations from the Web Interface

D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
145
Cisco DX70 and DX80 Administrator Guide
Sign in to the web interface and navigate to Integration >
Developer API.
Commands (xCommand) and configurations (xConfiguration) can
be executed from the web interface. Syntax and semantics are
explained in the API guide for the video system.
Execute API commands and configurations from the web interface
Execute API commands and configurations
1. Enter a command (xCommand or xConfiguration),
or a sequence of commands, in the text area.
2. Click Execute to issue the command(s).
About the API
The application programming interface
(API) is a tool for integration professionals
and developers working with the video
system. The API is described in detail in
the API guide for the video system.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Appendices