Cisco DX70 Administrator's Guide

D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
18
Cisco DX70 and DX80 Administrator Guide
Sign in
Enter user name and passphrase for the endpoint and
click Sign In.
The system is delivered with a default user
named admin with no passphrase. Leave the
Passphrase field blank when signing in for the
first time.
It is mandatory to set a password for the
admin user.
Sign out
Hover the mouse over
the user name and
choose Signout from
the drop-down list.
The web interface is the administration portal for
the video system. You can connect from a computer
and administer the system remotely. It provides full
configuration access and offers tools and mechanisms
for maintenance.
Note: The web interface requires that HTTP or HTTPS
is enabled (refer to NetworkServices > HTTP > Mode
setting).
We recommend that you use the latest release of one
of the major web browsers.
How to administer the video system (page 2 of 4)
The web interface of the video system
Connect to the video system
Open a web browser and enter the IP address of the
video system in the address bar.
How to find the IP address
1. Select the settings icon (cogwheel) in the
status bar of the user interface.
2. Select Settings, followed by About this
device.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction

Cisco DX70 Specifications

General

Connectivity	Ethernet, Wi-Fi
Video Standards	H.264
Operating System	Android-based
Power over Ethernet (PoE)	Yes
Microphone	Integrated microphone
Speaker	Integrated
Audio Standards	G.711, G.722
Mounting Options	Wall mount