Cisco Firepower 9300 Command Reference

end
To return to the EXEC (top level) mode of the CLI, use the end command.
end
Syntax Description
This command has no arguments or keywords.
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to return to the highest-level mode of the CLI from service profile mode.
FP9300-A # scope org Test
FP9300-A /org # scope service-profile Sample
FP9300-A /org/service-profile # end
FP9300-A #
Related Commands
DescriptionCommand
Enters top level mode from any mode.top
Cisco Firepower 4100/9300 FXOS Command Reference
98
A – R Commands
end

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes