Cisco Firepower 9300 Command Reference

scope profile
To enter Smart Call Home and Smart Licensing destination profile mode, use the scope profile command.
scope profile profile_name
Syntax Description
The name of the destination profile; between 1 and 16 characters.
profile_name
Command Modes
Callhome (/monitoring/callhome/) mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to enter profile mode and then display the destination configured for the
profile:
FP9300-A /monitoring/callhome # scope profile SLProfile
FP9300-A /monitoring/callhome/profile # show destination
Destination:
Name Transport Protocol Email or HTTP/HTTPS URL Address
---------- ------------------ -------------------------------
SLDest Https
https://tools.cisco.com/its/service/oddce/services/DDCEService
FP9300-A /monitoring/callhome/profile #
Related Commands
DescriptionCommand
Lists currently defined Smart Call Home and Smart Licensing profiles; available
in monitoring/callhome mode.
show profile
Cisco Firepower 4100/9300 FXOS Command Reference
148
S Commands
scope profile

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes