Cisco Firepower 9300 Command Reference

disable cc-mode
To disable Common Criteria mode, use the disable cc-mode command.
disable cc-mode
Syntax Description
This command has no arguments or keywords.
Command Modes
Security (/security) mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
A reboot of the system will be required after this command is committed.
Example
This example shows how to enter security mode and disable Common Criteria mode:
FP9300-A # scope security
FP9300-A /security # disable cc-mode
Warning: A reboot of the system is required in order for the system to be
operating in a non-CC approved mode.
FP9300-A /security* #
Related Commands
DescriptionCommand
Enables Common Criteria mode.enable cc-mode
Shows current Common Criteria mode admin and operational states.show cc-mode
Cisco Firepower 4100/9300 FXOS Command Reference
88
A – R Commands
disable cc-mode

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes