Cisco Firepower 9300 Command Reference

scope security
To enter security mode, use the scope security command.
scope security
Syntax Description
This command has no arguments or keywords.
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
You do not have to enter this mode with a managed object.
Example
This example shows how to enter security mode:
FP9300-A# scope security
FP9300-A /security #
Related Commands
DescriptionCommand
Shows information about the security policies.show security
Cisco Firepower 4100/9300 FXOS Command Reference
150
S Commands
scope security

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes