Cisco Firepower 9300 Command Reference

show configuration
To display system configuration information, use the show configuration command.
show configuration [all|no-diff-markers|no-pending|pending]
Syntax Description
(Optional) Displays all current configuration information.all
(Optional) Doesn’t include diff-markers in the displayed configuration
information.
no-diff-markers
(Optional) Doesn’t include pending (uncommitted) configuration commands.no-pending
(Optional) Shows all pending configuration commands only.pending
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to display information about pending (uncommitted) configuration
commands:
FP9300-A# show configuration pending
scope services
+ create ntp-server 192.168.200.101
exit
FP9300-A#
Related Commands
DescriptionCommand
Shows CLI-related status information.show cli
Cisco Firepower 4100/9300 FXOS Command Reference
254
S Commands
show configuration

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes