Cisco Firepower 9300 Command Reference

show firmware
To view system firmware information, use the show firmware command.
show firmware [detail|expand|monitor|package-version]
Syntax Description
(Optional) Use this keyword to display the current firmware and start-up
versions for the device, as well as the running version, its activate status, and
the start-up version for the service manager.
detail
(Optional) Use this keyword to list an extensive list of version and status
information for the various system components.
expand
(Optional) Use this keyword to display current package version and upgrade
status for the device manager, fabric interconnect, and chassis server(s).
monitor
(Optional) Use this keyword to display current package version for the device
manager.
package-version
Command Modes
System mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
You can use show firmware monitor repeatedly to monitor the status of a firmware upgrade download and
activation.
Example
This example shows how to monitor firmware version and upgrade status:
FP9300-A# scope system
FP9300-A /system # show firmware monitor
FPRM:
Package-Vers: 2.4(1.52)
Upgrade-Status: Ready
Fabric Interconnect A:
Package-Vers: 2.4(1.52)
Upgrade-Status: Ready
Chassis 1:
Server 1:
Package-Vers: 2.4(1.52)
Upgrade-Status: Ready
Server 2:
Package-Vers: 2.4(1.52)
Upgrade-Status: Ready
FP9300-A /system #
Cisco Firepower 4100/9300 FXOS Command Reference
271
S Commands
show firmware

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes