Cisco Firepower 9300 Command Reference

show connection
To show configuration information for the current IPSec connections, or for a single connection, use the show
connection command.
show connection [detail|name]
Syntax Description
(Optional) Show detailed IPSec connection information.detail
(Optional) The specific connection name; can be up to 16 alphanumeric
characters.
name
Command Modes
IPSec mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command to display current IPSec connection information.
Example
This example shows how to display IPSec connection information:
FP9300-A # scope security
FP9300-A /security # scope ipsec
FP9300-A /security/ipsec # show connection
IPSec Connection:
Name Admin State Local Address Remote Address ESP Mode Keyring Name
---------- ----------- ------------- -------------- --------- ------------
TEST Disabled Transport
FP9300-A /security/ipsec #
Related Commands
DescriptionCommand
Shows IPSec connection logs.show ipsec-log
Shows IPSec statistics.show stats
Cisco Firepower 4100/9300 FXOS Command Reference
255
S Commands
show connection

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes