Cisco Firepower 9300 Command Reference

connect module: Command List
After you have used the Supervisor connect module command to connect to a specific module console, the
following commands are available on that console. See connect adapter, on page 37 for information about
the connect module command.
In this shell, you can perform operations on the fabric interconnect, including copying files, rebooting the
fabric interconnect, and running ping and traceroute commands.
Table 12: Commands Available on a Module Console
Additional InformationCommand
Enable blade secure log insecure-login
Cisco Firepower 4100/9300 FXOS Command Reference
414
connect shell Commands
connect module: Command List

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes