Cisco Firepower 9300 Command Reference

Command History
The CLI stores all commands used in the current session. You can step through the previously used commands
by using the up-arrow or down-arrow keys. The up-arrow key moves to the previous command in the history,
and the down-arrow key moves to the next command in the history. When you get to the end of the history,
pressing the down-arrow key does nothing.
You can enter any command in the history again by stepping through the history to recall that command and
then pressing Enter. The command is entered as if you had manually typed it. You can also recall a command
and change it before you press Enter.
Cisco Firepower 4100/9300 FXOS Command Reference
9
CLI Overview
Command History

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes