Cisco Firepower 9300 Command Reference

show cloud-connector
To display cloud-connector status and configuration information, use the show cloud-connector command.
show cloud-connector [detail|expand|fsm]
Syntax Description
(Optional) Shows additional cloud connector details.detail
(Optional) Shows expanded cloud connector information.expand
(Optional) Shows current Finite State Machine (FSM) status information.fsm status
Command Modes
Any command mode
Command History
ModificationRelease
Command added.2.2(2)
Example
This example shows how to display status information for the cloud connector FSM:
FP9300-A# show cloud-connector fsm status
FSM 1:
Remote Result: Not Applicable
Remote Error Code: None
Remote Error Description:
Status: Nop
Previous Status: Nop
Timestamp: Never
Try: 0
Progress (%): 100
Current Task:
FP9300-A #
Related Commands
DescriptionCommand
Enters cloud connector mode.scope cloud-connector
Cisco Firepower 4100/9300 FXOS Command Reference
253
S Commands
show cloud-connector

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes