Cisco Firepower 9300 Command Reference

show server boot-order
To display the boot order of a server, use the show server boot-order command.
show server boot-order [server_id|detail|uuid dynamic_uuid]
Syntax Description
(Optional) Displays the boot order for a specific server, expressed as
chassis-number/server-number (rack ID is not a valid option). The keyword
detail is available with this option.
server_id
(Optional) Displays detailed boot order information.detail
(Optional) Displays the boot order for a particular server, specified with its
dynamic universally unique identifier (UUID); entered in the form
NNNNNNNN-NNNN-NNNN-NNNN-NNNNNNNNNNNN. The keyword detail is available
with this option.
uuid dynamic_uuid
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
By default, this command displays boot order information for all servers.
Example
This example shows how to display the boot order of all servers:
FP9300-A# show server boot-order
Boot Definition:
Full Name: sys/chassis-1/blade-1/boot-policy
Reboot on Update: No
Boot Mode: Uefi
Boot Storage:
Order: 1
Local Storage:
Name: local-storage
Boot Any Local Device:
Order: 1
Type: Local Any
Full Name: sys/chassis-1/blade-2/boot-policy
Reboot on Update: No
Boot Mode: Uefi
Boot Storage:
Order: 1
Local Storage:
Name: local-storage
Cisco Firepower 4100/9300 FXOS Command Reference
332
S Commands
show server boot-order

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes