Cisco Firepower 9300 Command Reference

scope licdebug
To enter license debug mode from license mode, use the scope licdebug command.
scope licdebug
Syntax Description
This command has no arguments or keywords.
Command Modes
License mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to enter license debug mode from license mode:
FP9300-A # scope license
FP9300-A /license # scope licdebug
FP9300-A /license/licdebug #
Related Commands
DescriptionCommand
Enters license mode.scope license
Cisco Firepower 4100/9300 FXOS Command Reference
142
S Commands
scope licdebug

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes