Cisco Firepower 9300 Command Reference

show server assoc
To view the service profile associated with each server, use the show server assoc command.
show server assoc [server_id|uuid dynamic_uuid]
Syntax Description
(Optional) Displays information for a particular server, specified by
chassis-number/server-number (rack ID is not a valid option).
server_id
(Optional) Displays information for a particular server, specified using its
dynamic universally unique identifier (UUID), entered in the form
NNNNNNNN-NNNN-NNNN-NNNN-NNNNNNNNNNNN.
uuid dynamic_uuid
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
By default, this commands lists the service profile associations on each server.
Example
This example shows how to display service profiles associated with the system servers:
FP9300-A# show server assoc
Server Association Service Profile
------- ------------ ---------------
1/1 Associated ssp-sprof-1
1/2 Associated ssp-sprof-2
FP9300-A#
Related Commands
DescriptionCommand
Shows service profile information.show service-profile
Cisco Firepower 4100/9300 FXOS Command Reference
329
S Commands
show server assoc

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes