Cisco Firepower 9300 Command Reference

enable reservation
To enable permanent license reservation, use the enable reservation command.
enable reservation
Syntax Description
This command has no arguments or keywords.
Command Modes
License (/license) mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Enable license reservation before attempting to assign a permanent license to your Firepower 4100/9300
chassis.
Example
This example shows how to enter license mode and enable reservation mode:
FP9300-A # scope license
FP9300-A /license # enable reservation
FP9300-A /license #
Related Commands
DescriptionCommand
Disables permanent license reservation.disable reservation
Shows current license information.show license
Cisco Firepower 4100/9300 FXOS Command Reference
97
A – R Commands
enable reservation

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes