request universal
To generate a reservation request code, use the request universal command.
request universal
Syntax Description
This command has no arguments or keywords.
Command Modes
Reservation (/license/reservation) mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Before you begin, you must purchase the permanent licenses so they are available in Smart Software Manager.
Not all accounts are approved for permanent license reservation. Make sure you have approval from Cisco
for this feature before you attempt to configure it.
Enable license reservation before attempting to assign a permanent license to your Firepower 4100/9300
chassis.
After issuing this command, use show license resvcode to view the generated reservation request, authorization
and return codes.
Example
This example shows how to generate a reservation request code and view the generated codes:
FP9300-A# scope license
FP9300-A /license # scope reservation
FP9300-A /license/reservation # request universal
FP9300-A /license/reservation # show license resvcode
Warning : generating the reservation code takes a few seconds.
Please run the 'show license resvcode' again if the code is not available.
Reservation request code :
<empty>
Reservation authorization code :
<empty>
Reservation return code :
<empty>
Related Commands
DescriptionCommand
Enables permanent license reservation.enable reservation
Shows current license information.show license
Cisco Firepower 4100/9300 FXOS Command Reference
118
A – R Commands
request universal
To Next Page
Loading...
Need help?
General
