Cisco Firepower 9300 Command Reference

delete decommissioned server
To delete a decommissioned server, use the delete decommissioned server command.
delete decommissioned server vendor model serial_number
Syntax Description
The name of the company that manufactured the server; can be no more than
510 characters.
vendor
The module’s model name; can be no more than 510 characters.
model
The module’s serial number; can be no more than 510 characters.
serial_number
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.4(1)
Example
This example shows how to delete a decommissioned server.
FP9300-A # delete decommissioned server Cisco Systems, Inc.
Cisco Firepower 9000 Series Security Module
FLM1949C6J1
FP9300-A* # commit-buffer
Related Commands
DescriptionCommand
Decommissions a server.decommission server
Cisco Firepower 4100/9300 FXOS Command Reference
85
A – R Commands
delete decommissioned server

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes