EasyManuals Logo

Cisco Firepower 9300 Command Reference

Cisco Firepower 9300
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #327 background imageLoading...
Page #327 background image
show sel
To display the contents of the system event log (SEL) for a server, use the show sel command.
show sel server_id
Syntax Description
The server identifier, expressed as chassis-number/server-number (rack ID is
not a valid option).
server_id
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to display the contents of the SEL for server 1 in chassis 1:
FP9300-A# show sel 1/1
show sel 1/1
1 | 12/16/2015 23:09:55 | CIMC | Event Logging Disabled DDR4_
P2_H2_ECC #0x99 | Log Area Reset/Cleared | | Asserted
2 | 12/16/2015 23:09:56 | CIMC | Processor P2_THERMTRIP_N #0x
7a | Limit Not Exceeded | Asserted
3 | 12/16/2015 23:09:57 | CIMC | Processor P1_THERMTRIP_N #0x
79 | Limit Not Exceeded | Asserted
4 | 12/16/2015 23:10:00 | CIMC | Platform alert LED_SYS_ACT #
0xa4 | LED is on | Asserted
5 | 12/16/2015 23:10:00 | CIMC | Platform alert LED_SYS_ACT #
0xa4 | LED color is green | Asserted
6 | 12/16/2015 23:10:01 | CIMC | Processor DDR4_P2_H3_TMP #0x
73 | Limit Not Exceeded | Asserted
7 | 12/16/2015 23:10:01 | CIMC | Platform alert LED_LOM_FAULT
#0xa3 | LED is off | Asserted
8 | 12/16/2015 23:10:01 | CIMC | Platform alert LED_LOM_FAULT
#0xa3 | LED color is blue | Asserted
9 | 12/16/2015 23:10:03 | CIMC | Processor DDR4_P2_H2_TMP #0x
72 | Limit Not Exceeded | Asserted
--More--
<--- remaining lines removed for brevity --->
FP9300-A#
Related Commands
DescriptionCommand
Enters server mode.scope server
Cisco Firepower 4100/9300 FXOS Command Reference
325
S Commands
show sel

Table of Contents

Other manuals for Cisco Firepower 9300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Firepower 9300 and is the answer not in the manual?

Cisco Firepower 9300 Specifications

General IconGeneral
ChassisModular
Security ModulesUp to 3
Firewall ThroughputUp to 1.2 Tbps
ManagementCisco Firepower Management Center
Form FactorRack-mountable
Number of Slots3
Encryption ThroughputUp to 100 Gbps
Operating Temperature32 to 104°F (0 to 40°C)
Humidity10% to 90% non-condensing
AltitudeUp to 10, 000 ft
Power SupplyDual, hot-swappable
Product TypeSecurity Appliance
Supported ModulesSecurity, network, and interface modules
RedundancyYes

Related product manuals