Cisco Firepower 9300 Command Reference

Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
By default, this command displays general application instance configuration information.
Example
This example shows how to display general application instance information:
FP9300-A# scope ssa
FP9300-A /ssa # scope slot 2
FP9300-A /ssa/slot # scope app-instance asa cluster1
FP9300-A /ssa/slot/app-instance # show
Application Instance:
App Name Identifier Admin State Oper State Running Version Startup Version
Deploy Type Profile Name Cluster State Cluster Role
---------- ---------- ----------- ---------------- --------------- ---------------
----------- ------------ --------------- ------------
asa cluster1 Enabled Online 201.2.1.125 201.2.1.125
Native In Cluster Slave
Related Commands
DescriptionCommand
Enters application instance mode for a specific application.scope app-instance
Shows general configuration information for a specific SSP module.show slot
Cisco Firepower 4100/9300 FXOS Command Reference
238
S Commands
show (app-instance)

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes